The notice when using acrylic sheet

//The notice when using acrylic sheet

The notice when using acrylic sheet

All should understand acrylic sheet has high permeability luminosity, low turbidity, light but strong, good processing performance, goedkoop nike air max 2016 rich color, Andre Ethier Jersey excellent electrical Detailed insulation, excellent weather resistance,and is able to withstand high temperature, Nike Air Max Dames Goedkoop UV light , strong sun light irradiation , solvent resistanceand wholesale nba jerseys commonly used chemicals (it is best to avoid exposure to direct sunlight andhigh temperature contact de of cigarette, etc.) ;


Acrylic sheet also has high recycle rate. But the shortcomings of acrylic board is pooranti impact performance , but the modified acrylic plate can meet the performance requirements of anti impact in wholesale jerseys most occasions. But I also need to remind the company that acrylic sheet needs to be taken good care of no matter how you improve it.


Hope you pay attention to the following points

acrylic will be out of shape when temperature heating is 70 degrees , when heated to above 100 degrees, Nike Air Max Dames acrylic will be soften. So acrylic Cost? should be avoided to the application of above 100 degrees


Acrylic polishing, if it is a small scratch, Fjallraven Kanken Classic

it can be directly wiped with toilet paper or cloth dipped in a little toothpaste , if it is a big scratch, I don’t suggest grinding acrylic, if using sandpaper to grind, the product is cheap nba jerseys discarded, and the entire surface is scratched, it will be worse.

You should scrubAcrylic with soft cloth , due to electric phenomenon of dry Product cloth frictiononthe surface. So if there is a surface with dust, you can use soft cloth to wash it with the concentration of 1% soapy water , do not use any detergent containing granular objects, and do not use various chemical bath agent.


Acrylic is easy to crack. Due to surface hardness is equivalent to aluminum, Mens Nike Air Max 90 so surface protection should be paid and attention to when you take and put it.if Regulatory encountered damages,you can use abrasive polishingwith yellow aluminum cheap mlb jerseys to restore the original beautiful surface


Acrylic thermal expansion coefficient is large, sac fjallraven kanken the expansion degree is about cheap mlb jerseys nine times larger than metal.Device or fixed to temperature changes advantages should be considered, and fully set aside the expansion gap.


If the acrylic products is damaged, Adidas Superstar Heren you can use IPS adhesive glue / methylenechloride adhesiveor quick drying adhesive.


If you want to make acrylic products glamorous, you can use liquid polishing wax, ''''

By | 2017-09-22T16:38:38+00:00 June 11th, 2016|Acrylic wholesale knowledge|0 Comments

About the Author:

Leave A Comment